Bis Automation, Inc. - Item Description Page

X20BC0088 Fieldbus: EtherNet/IP Integrated 3-port switch for efficient cabling Auto-configuration of I/O modules Can be configured by the scanner (master) using configuration Assembly Web interface DHCP-capable Configurable I/O cycle (0.5 to 4 ms) Minimum fieldbus cycle time (also requested packet interval or RPI): 1 ms - Product description: Material number: X20BC0088 Description: EtherNet/IP is a fieldbus based on EtherNet/IP that was developed by Allen-Bradley (Rockwell Automation) and later handed off to the Open DeviceNet Vendor Association (ODVA) as an open standard. In 1998, a working group at ControlNet International developed a procedure for setting the published Common Industrial Protocol to Ethernet. EtherNet/IP was published in March 2000 as an open industrial automation standard based on this procedure. The X20BC0088 bus controller makes it possible to connect X2X Link I/O nodes to EtherNet/IP. The bus controller can be operated via the X20IF10D1-1 interface module or by 3rd-party systems with EtherNet/IP scanner functionality.